manualshive.com logo in svg

Phoenix Contact THERMOMARK ROLL 2.0, User Manual

Share
Download
Phoenix Contact THERMOMARK ROLL 2.0 User Manual Download Page 16

THERMOMARK ROLL 2.0

16 / 52

PHOENIX CONTACT

108716_en_01

2.4.4

Printing

The THERMOMARK ROLL 2.0 is ready for operation once all connections have been es-

tablished, the material and ink ribbon have been inserted, and the printhead is locked.

Tear-off plate

After printing, the material strips are detached by hand. The printer is equipped with a tear-

off plate for this purpose.

Cutter or perforator

A cutter which automatically cuts off labels is available as an accessory 

(THERMOMARK ROLL-CUTTER, 5146422).

A perforator is available for shrink sleeves (THERMOMARK ROLL-CUTTER/P, 5146435).

For installation see 

“Cutter or perforator”

 on 

page 30

.

2.4.5

Creating print jobs

Create the print jobs using the CLIP PROJECT or PROJECT complete marking software.

The marking software can be used to create markings on the computer that are adapted to 

the Phoenix Contact marking material.

Select the THERMOMARK ROLL 2.0 as the output device there. You will be provided with 

a list of materials that are suitable for this device.

–

CLIP PROJECT can be downloaded at 

phoenixcontact.net/qr/5146053

.

–

PROJECT complete can be downloaded at 

phoenixcontact.net/qr/1050453

.

Summary of Contents for THERMOMARK ROLL 2.0























































Reviews:

No comments

Brands by name

Popular brands

Load more brands