manualshive.com logo in svg

Phoenix Contact THERMOMARK ROLL 2.0, User Manual

Share
Download
Phoenix Contact THERMOMARK ROLL 2.0 User Manual Download Page 40

THERMOMARK ROLL 2.0

40 / 52

PHOENIX CONTACT

108716_en_01

5.6

Repairs

5.7

Storage and disposal

Transporting the device

•

Remove the material and the ink ribbon.

•

Pack the device in the original packaging for shipping.

Storage

•

Only store the device in dry surroundings.

•

Store the device in such a way as to avoid any potential damage.

•

Store the device completely with individual parts and accessories. Otherwise, key com-

ponents could be missing when restarting the device.

Disposal

WARNING: Hazard to operational safety

Incorrect operation or modifications to the device can endanger your safety or damage 

the device. Do not repair the device yourself. If the device is defective, please contact 

Phoenix Contact.

The device contains valuable recyclable materials, which should be utilized. The electron-

ic circuit board is fitted with a lithium battery.

Summary of Contents for THERMOMARK ROLL 2.0























































Reviews:

No comments

Brands by name

Popular brands

Load more brands