THERMOMARK ROLL 2.0
PHOENIX CONTACT
108716_en_01
2.3
Connecting the device
Mains and computer connections
Figure 2-2
Connections on the rear of the device
1
Power supply switch
2
Mains socket
3
SD card slot
4
Two USB master interfaces for keyboard, scanner, USB memory device and WLAN
stick
5
USB slave interface, full-speed, for connection to a computer
6
Ethernet 10/100Base-T
7
RS-232 interface
8
USB master interface for keyboard, scanner, USB memory device, WLAN stick and
Bluetooth adapter
Errors can occur during operation due to insufficient or missing grounding. Make sure that
all devices and cables connected to the printer are grounded.
Before connecting or disconnecting devices or cables, switch off the printer and the con-
nected devices. USB connections can be established and disconnected when the printer is
switched on.
2.3.1
Connecting the mains cable
The THERMOMARK ROLL 2.0 is equipped with a wide range power supply unit for AC volt-
ages between 100 V and 240 V.
•
Insert the mains cable into the socket of the device.
•
Connect the mains cable to a socket.
1
3
2
4
5
6
7
8
