Phoenix Contact 27 41 40 6, User Manual

Page: 72 / 80

onlinecomponents.com
Parameter Data Channel (PCP)
6170
B
66
S0:
"0": AS-i power supply O.K.,
"1": short-time failure of the AS-i power supply occured.
S1-S31:
*"0": slaves with this address didn’t have any configuration errors,
"1": slaves with this address caused a short-time configuration error.
13.3.17 Block the Module Errors (index 5FDA)
(READ, WRITE, Data-Type-Index 49h)
The module error messages "AS-i power failure" and "AS-i configuration error" can
be blocked separately, both via the process data and PCP. Both blocks for each
error source are logically combined as OR, i. e. the module errors are only repor-
ted if they are not blocked via PCP nor via the process data.
• block module errors
Byte 0; modul error on AS-i power failure
00h (false) = blocking depends on the control word
FFh (true) = modul error message blocked
Byte 1; Modulfehler bei AS-i-Konfigurationsfehlern
00h (false) = blocking depends on the control word
FFh (true) = modul error message blocked
13.3.18 LOS (index 5FDB)
(READ, WRITE, Data-Type-Index 10h)
The object for the list of slaves, that shall release the offline phase when they have
an error, is also an octet string with 32 bits as the other slave lists, too.
In any case writing this list acknowledges the release of the offline phase, wether
this function was activated by this object or setting bit 5 of the control word.
• LOS
Byte 0
slaves 1 - 7 / 1A - 7A
Byte1 slaves 8 - 15 / 8A - 15A
Byte2 slaves 16 - 23 / 16A - 23A
Byte3 slaves 24 - 31 / 24A - 31A
0xFF/0x00 (true/false)
0xFF/0x00 (true/false)
S7* S6 S5 S4 S3 S2 S1 X
S15 S14 S13 S12 S11 S10 S9 S8
S23 S22 S21 S20 S19 S18 S17 S16
S31 S30 S29 S28 S27 S26 S25 S24