Phoenix Contact 27 41 40 6, User Manual

Page: 59 / 80

onlinecomponents.com
Parameter Data Channel (PCP)
6170
B
53
Byte 1 slaves 8 - 15 / 8A - 15A
Byte 2 slaves 16 - 23 / 16A - 23A
Byte 3 slaves 24 - 31 / 24A - 31A
Byte 4 slaves 1B - 7B
Byte 5 slaves 8B - 15B
Byte 6 slaves 16B - 23B
Byte 7 slaves 24B - 31B
*"0": slave is not projected, i. e. no slave with this address has to be installed,
"1": slave is projected, i. e. a slave with this address has to be installed.
13.3.2 Configuration Mode (index 5F51)
(WRITE, Data-Type-Index 01h)
This command is used to put the AS-i/INTERBUS gateway into configuration mo-
de.
• Configuration mode
Byte 0
00h (false) = configuration mode off (protected mode)
ffh (true) = configuration mode on
13.3.3 Parameterize Slave
i
(index 5F52-5F8F)
(WRITE, Data-Type-Index 10h, i = 1 ... 62)
With this service, you can send the 4 bits of parameter data to the selected AS-i
slave. This command is used, for instance, to modify the properties of a slave du-
ring operation.
• Parameters to be sent to slave
i
:
Byte 0 slave
i
S15 S14 S13 S12 S11 S10 S9 S8
S23 S22 S21 S20 S19 S18 S17 S16
S31 S30 S29 S28 S27 S26 S25 S24
S7B S6B S5B S4B S3B S2B S1B 0
S15B S14B S13B S12B S11B S10B S9B S8B
S23B S22B S21B S20B S19B S18B S17B S16B
S31B S30B S29B S28B S27B S26B S25B S24B
0xFF/0x00 (true/false)
X X X X P3 P2 P1 P0