Phoenix Contact 27 41 40 6, User Manual

Page: 18 / 80

onlinecomponents.com
Installation, Displays and Operating Keys
6170
B
12
4.1.1 Replacing Terminals
4.1.2 Adjusting the Length of the Process Data
If the object 5FFB is 0 (state of delivery) the length of the process data is set by
the J1... J3 on the
left terminal block.
The jumpers have to be set as follows:
J1 between terminal 1.0 and 2.0
J2 between terminal 1.1 and 2.1
J3 between terminal 1.2 and 2.2
Length of the process data:
4.1.3 Connecting the AS-i Circuit
The AS-i circuit is connected to the right terminal block. AS-i + is connected to the
terminals 1.0 - 1.3 and AS-i - to the terminals 2.0 - 2.3.
Do not replace terminals while power is connected!
Before removing or mounting a terminal, disconnect power to the
entire station! Make sure the entire station is reassembled before
switching power back on.
J1
J3
J2
1 2 1 2 1 2 1 2
1 2 1 2 1 2
1 2
1 3 7 5 9 11 15 13
1 2
1.2
1.2
1.3
2.1
2.2
2.3
1.0 2.0
AS-i +
AS-i +
AS-i +
AS-i +
AS-i -
AS-i -
AS-i -
AS-i -