Phoenix Contact 2313643, User Manual, Page: 66 / 94

PSI-MODEM-SHDSL/ETH, TC ETH EXTENDER
66
PHOENIX CONTACT 104273_en_01
6.3.1 Point-to-point wizard, line structure wizard, ring structure
wizard
Configuration >> Point-to-point wizard or line structure wizard or ring structure wizard
Step 1: Project configura-
tion
In the case of the point-to-point wizard, two devices are connected to each other. In the
case of the line structure and the ring structure wizard, you first need to determine how
many devices are to be connected (3 ... 50 devices).
• Select a file name and storage location for the configuration file. The extension of the
project file is *.dat.
• Click on the "....\" button and select a storage location. The default file name is
"NewProject.dat" and can be changed.
You can save the file at any time via the "File, Save" menu. Otherwise, the file will be
saved once the wizard is finished. A file that is not yet saved is indicated in the title bar
with an *.
Step 2: Assign device
names
Each device already has a name (Device 1, Device 2, etc.). You can select a device by
clicking on it or using the "Last device"/"Next device" buttons and assign a new name, e.g.
"Device A" or "Pumping station". The name can contain 255 characters including special
characters.