Phoenix Contact 2313643, User Manual, Page: 13 / 94

Product description
104273_en_01 PHOENIX CONTACT
13
1.2.1 Technical Data
19" Ethernet communication unit Type Order No. Pcs. / Pkt.
19" Ethernet communication unit for networking systems and stations via
SHDSL technology. Data rates of up to 30 Mbps, distances of up to 20 km on
in-house copper cables via line, star, and ring structures. Diagnostics via
LEDs or software
TC ETH EXTENDER S19 2702077 1
Accessories Type Order No. Pcs. / Pkt.
Industrial Ethernet extender , for point-to-point connections, line and ring
structures. Data rates of up to 30 Mbps on the in-house copper cables, inte-
grated diagnostic function, two configurable alarm outputs
PSI-MODEM-SHDSL/ETH 2313643 1
USB cable, assembled at both ends with USB plug connector
connector type: A to B, length: 1.8 m USB cable, USB 2.0, 4-pos.,
straight connector USB type A, to straight connector USB type B,
cable length: 1.8 m
VS-04-C-SDA/SDB/1.8 1405578 1
Patch cable, CAT6, pre-assembled, 2.0 m FL CAT6 PATCH 2.0 2891589 10
Sensor/actuator cable, 4-pos., PUR, halogen-free, RAL 7021 (black gray),
straight M8 connector, to free cable end, cable length: 1.5 m
SAC-4P-M 8MS/1.5-PUR 1681787 1
Sensor/actuator cable, 4-pos., PUR, halogen-free, RAL 7021 (black gray),
straight M8 connector, to free cable end, cable length: 3 m
SAC-4P-M 8MS/3.0-PUR 1681790 1
Sensor/actuator cable, 4-pos., PUR, halogen-free, RAL 7021 (black gray),
straight M8 connector, to free cable end, cable length: 5 m
SAC-4P-M 8MS/5.0-PUR 1681800 1
Sensor/actuator cable, 4-pos., PUR, halogen-free, RAL 7021 (black gray),
straight M8 connector, to free cable end, cable length: 10 m
SAC-4P-M 8MS/10.0-PUR 1694143 1
Attachment plug with surge protection for two SHDSL telecommunica-
tions interfaces (ports). Connection: RJ45 (RJ12/RJ11) and plug-in screw ter-
minal block (COMBICON) Alternatively, can be snapped onto a DIN rail
DT-TELE-SHDSL 2801593 1
Supply
Supply voltage range 100 V AC ... 240 V AC
Nominal supply voltage 230 V AC (50 Hz ... 60 Hz)
Typical current consumption < 300 mA (220 V AC)
SHDSL interface according to ITU-T G.991.2.bis
Connection method Socket M8
Transmission length < 20 km (depending on data rate and cable cross-section)
Data rate < 30 Mbps (4-wire operation)
< 15.3 Mbps (2-wire operation)
Ethernet interface, 10/100 Base-T(X) according to IEEE 802.3u
Connection method RJ45 socket, shielded
Serial transmission speed 10/100 Mbps, auto-negotiation
Transmission length 100 m (twisted pair, shielded)
Supported protocols Transparent protocol for IPv4 and IPv6
USB interface (configuration/diagnostics)
Connection method Mini-USB type B, 5-pos.
Type USB 2.0
Transmission length Maximum 5 m, only for configuration and diagnostics