Phoenix Contact 1153079, Installation And Startup Manual

Page: 13 / 54

Device description
108413_en_06 PHOENIX CONTACT
13 / 52
2.3 FL MGUARD 1102
The device provides the following network connections:
– Network interface 1 / Net zone 1 : Ethernet 10/100/1000 Mbps (RJ45 port)
– Network interface 2 / Net zone 2 : Ethernet 10/100/1000 Mbps (RJ45 port)
Figure 2 - 2 FL MGUARD 1102 operating elements and LEDs
① Status and diagnostic LEDs
(See Section 2.4.1 )
⑥ Network interface 1 / Net zone 1 (RJ45 Ethernet
port) (see Section 3.3 )
LNK/ACT LED (top) | SPD LED (bottom)
(see Section 2.4.2 )
② Connection of digital inputs via COMBICON con -
nector (Push-in contact)
(See Section 3.4 )
⑦ Status and diagnostic LEDs
(See Section 2.4.3 , 2.4.4 )
③ Connection of digital outputs via COMBICON con -
nector (Push-in contact)
(See Section 3.4 )
⑧ Mode button
(See Section 5 )
④ Connection of supply voltage via COMBICON con -
nector (Push-in contact)
(See Section 3.2 )
⑨ SD card holder (on the back of the device)
(See Section 3.5 )
⑤ Network interface 2 / Net zone 2 (RJ45 Ethernet port)
(see Section 3.3 )
LNK/ACT LED (top) | SPD LED (bottom)
(see Section 2.4.2 )
⑦
⑥
⑤
①
②
③
④
⑧ ⑨