Phoenix Contact 1153079, Installation And Startup Manual

Page: 14 / 54

FL MGUARD 1000 product family
14 / 52
PHOENIX CONTACT 108413_en_06
2.4 LED status and diagnostic indicators
The status and diagnostic LEDs indicate different system and error states of the device.
2.4.1 PF1-PF5
The tricolor PF1-PF5 LEDs (green/red/orange) indicate different statuses and
system states of the device.
They are used during operation in
smart mode , for example (see Table 2 - 3 ).
Figure 2 - 3 LEDs: PF1-PF5
Table 2 - 2 LEDs: PF1 – PF5: Device status
Device status
Is being started
Firmware update Ready for opera -
tion
Test mode alarm
Wait until the device has
been started up com -
pletely.
The firmware is written to
the device.
NOTE: An interruption in
the power supply can
damage the device!
Do not switch off the de
-
vice!
Wait until the device has
been started up com -
pletely.
The device has been
started up completely.
The PF1 LED flashes with
the rhythm of a heartbeat.
The firewall test mode is
active and has triggered
one or several alarms.
The PF1 LED flashes with
the rhythm of a heartbeat.
PF1
PF2
PF3
PF4
PF5
XG1
1
3
2
4
XG2
1
3
2
4
PF1
US2
US1
PF2
PF3
PF4
PF5
XD1
MOD E
FAIL
1 3 2 4
5
XF1
XF2
PF1
PF2
PF3
PF4
PF5 PF1
PF2
PF3
PF4
PF5
PF1
PF2
PF3
PF4
PF5 PF1
PF2
PF3
PF4
PF5