Phoenix Contact 1153079, Installation And Startup Manual

Page: 21 / 54

Device description
108413_en_06 PHOENIX CONTACT
21 / 52
2.5.4 Active network services (device as server)
The following network services are activated by default on the device (as server) and can
be accessed externally via the network interfaces.
Table 2
- 9 Default setting : active services (as server)
Service Accessible via Configuration (default)
Web server Net zone 2 (XF2) Request via TCP-Port 443 (HTTPS)
Clients that are connected with the device
via net zone 2 can access the web-based
management (WBM).
RESTful server Net zone 2 (XF2) Request via TCP-Port 443 (HTTPS)
Clients that are connected with the device
via net zone 2 can access the RESTful
server ( Config API ).
SNMP server Net zone 2 (XF2) Request via UDP-Port 161 (SNMP)
Clients that are connected with the device
via net zone 2 can access the SNMP
server ( read only ).
DHCP server Net zone 2 (XF2) Request via UDP port 67
Clients that are connected with the device
via net zone 2 can request a network con -
figuration from its DHCP server.
The following network configuration is as
-
signed to requesting clients:
– IP address from area: 192.168.1.2 ...
192.168.1.254
– Local netmask: 24
– Default gateway: 192.168.1.1
– DNS server: 192.168.1.1
DNS server Net zone 2 (XF2) Request via UDP and TCP port 53
Clients that are connected with the device
via net zone 2 can send name resolution
requests to its DNS server.
NTP server Net zone 2 (XF2) Request via UDP port 123
Clients that are connected with the device
via net zone 2 can synchronize their sys -
tem time via the NTP server of the device.