20 Philips Lighting Controls
4.
Create a group
Grouping is required to initiate system functionality and dimming behaviors.
4b.
Add luminaires to group
Walk to the next
luminaire to be
added to the
group, point to
the luminaire
and press “add.”
Repeat step for adding all the luminaires in the group.
add
Luminaire
Luminaire
4a.
Open Group
Luminaire
Luminaire
Point remote to
any
luminaire
and press
“Open,” once.
Luminaire
Luminaire
Wait for the luminaire to
dim down to 5%.
Luminaire will dim
down to 5%.
Make sure the button is pressed only once. Pushing multiple times
can create multiple networks which can cause undesired operation.
The Luminaire/s have to be in a factory new state to group them
together. If changes were previously made on the luminaires,
then perform a factory reset as per the troubleshooting instructions
on page 30 of this manual.
All actions are to be performed by standing underneath a luminaire
and pointing the remote directly towards the luminaire sensor.
Summary of Contents for SpaceWise
Page 17: ...17 Industrial applications ...
Page 29: ...29 Troubleshooting FAQ ...