9
5b.
Set application mode
Lock the group,refer to
step
4e
.
• After locking lighting
group is operational in
selected mode.
mode
Luminaire
Luminaire
The luminaire will
FLASH twice and
group light level will
go to 50%.
O)))
Point to
any
of
the luminaires
in the group and
press “mode.”
While the LED is still
blinking red, enter the
number for the preferred
mode (see list at step
5
).
Point to
any
of
the luminaires
in the group,
press “send.”
6.
Change maximum light output
Light output setting
Max light output options
High
100%
Medium (Default)
88%
Low
77%
Minimum
66%
Choice of max light output per group will be in
fl
uenced by existing
conditions such as partition height, re
fl
ectances, light level preference and
energy goals.
Red LED on
remote will
start blinking.
II
If unsure about mode selection or remote blinking status then wait
for the remote blinking to stop and redo step
5b
.
Luminaire
Summary of Contents for SpaceWise
Page 17: ...17 Industrial applications ...
Page 29: ...29 Troubleshooting FAQ ...
