13
Private branch exchange -
Line type
In the UK
you can select with function 15 the connection to a
private branch exchange.
In all other countries
it is also possible to select the telephoneline
type with this function. Press MENU
15
, then
OK
, select
with
<
/
>
and confirm with
OK
. Continue with point
2.
1
Select
function 15
by pressing
MENU
and then entering the
digits
15
. Press
OK
.
2
You can switch on the PABX operation using
<
/
>
. Press
OK
.
PABX: NO
PABX: yes
3
Now enter the key that has to be pressed to obtain an
outside line (this outside line access code must be obtained
from the manufacturer). This is either
0
,
R
(in some
systems also described as FLASH) or a number key. Press
OK
.
4
Press
OK
. Your machine will then check that the outside line
can be obtained.
5
... if the check is successful, briefly appears:
CHECK OK
6
... if the check is unsuccessful, briefly appears:
CHECK NOT OK
7
You will be asked to repeat the entry. Check the key for
obtaining an outside line. However, if you have chosen the
correct key and on the display still appears the message
CHECK NOT OK
delete the key for obtaining the outside line by pressing
CLEAR
.
In case your PABX requires
R
to obtain an outside line
but it is still not possible to get through to the line, your
system might not be according to the regulations. There-
fore some technical settings have to be changed on your
fax machine. Please refer to your “Fax Call Centre”.
