11
ENGLISH
3
Clean the shaping disc with the supplied cleaning tool to remove the dough residues.
After that, you can clean it with water.
(Fig. 37 & 38)
4
Use the supplied cleaning brush to clean all detachable parts with dishwashing liquid and
warm water or clean in the dishwasher. Wipe all parts dry.
(Fig. 39)
Tip:
Use the pointy end of the cleaning brush to clean the inner bottom of the squeezing
tube.
5
Clean all detachable parts with dishwashing liquid and warm water or clean in the
dishwasher. After that, wipe all parts dry.
6
Use a dry cloth to clean the main unit, control knob, and the exterior of the Pasta maker.
(Fig. 40)
Note:
After cleaning, make sure all parts and the shaping disc air dry thoroughly before
storing. Assemble the Pasta maker back for next use.
Storage
1
Wind the power cord around the cord storage wrap.
(Fig. 41)
2
Dry the shaping discs and store them in the storage box.
(Fig. 42)
Note:
The small groove in the storage box is designed for the cleaning tool of the angel
hair shaping disc, which is not included in this Pasta maker. It will be launched and sold
separately.
3
Store the Pasta maker in a dry, well ventilated place after use.
Troubleshooting
This chapter summarizes the most common problems you could encounter with the
appliance. If you are unable to solve the problem with the information below, visit
www.philips.com/support
for a list of frequently asked questions or contact the Consumer
Care Center in your country.
Problem
Cause
Solution
The appliance does
not sound after the
plug is put in the wall
outlet.
The plug is not
connected properly,
or the outlet is not
connected to power
source.
Check whether the power plug is
plugged correctly and the outlet is
working properly.
The appliance does
not start the pasta
making process after
the plug is put in the
wall outlet.
You have not chosen a
pasta making program
or pressed the start
button .
Choose a pasta making program and
press the start button .
After pressing the
start button , the
appliance makes alarm
sounds and does not
work.
The chamber lid is not
assembled properly.
Make sure you follow the user manual
to assemble the chamber lid properly.