Philips HR1050, Manual

Page: 15 / 312

5 If you want to interrupt the cooking process, press the start/pause
button.
,
The start/pause button lights up continuously and the time on the
display stops counting down or up.
Note: If you did not set a cooking time, the display shows 00:00.
6 To resume the cooking process, press the start/pause button again.
,
The time on the display starts counting down or up again and the
start/pause button starts flashing again.
Note: If you did not set a cooking time, the display starts counting up from 0
again when you press the start/pause button.
Note: If you do not resume the cooking process within 10 minutes, the
appliance goes into standby mode. In this mode, the start/pause button flashes
every 10 seconds.
7 When the set time has elapsed, the appliance beeps and the start/
pause button lights up continuously. Press any button to stop the
beeping.
Melting, simmering, boiling, frying and keeping warm with
stirrer
1 Place the stirrer on the spindle in the pot.
Note: For easy assembly, always put the stirrer in the pot before you add the
ingredients.
2 Put the ingredients you want to prepare in the pot. If necessary, add
water (e.g. to cook potatoes).
Caution: Make sure the ingredients in the pot do not exceed the MAX
indication.
Note: Certain ingredients may cause discolouration. If you spill ingredients on
the outside of the HomeCooker, wipe away the spills immediately.
Tip: For cooking times and temperatures, see the recipe book.
3 If desired, put the lid on the pot.
4 Follow the instructions in section ‘Using the control panel’.
5 When the set time has elapsed, remove the ingredients from the pot
with a spatula or a scoop. Press any button to stop the beeping.
Note: You can blend the ingredients in the pot with a hand blender, but only if
you remove the stirrer from the pot first.
Note: If you want to remove the stirrer, never touch the hot ingredients and
only touch the top of the stirrer.
EnglisH
15