Philips HR1050, Manual

Page: 7 / 312

15 Temperature indication (°C or °F)
16 Stirrer on/off button
17 Start/pause button
18 Set time indication
19 Time increase button
20 Time decrease button
21 ’Heating plate hot’ light
22 Mains cord with plug
23 On/off button
24 Cord storage compartment
25 Control knob with 2 speed settings
26 Motor unit
27 Bowl with spout
28 Tool holder
29 Lid with feeding tube
30 Pusher
31 Coarse shredding disc
32 Fine shredding disc
33 Fine slicing disc
34 Coarse slicing disc
35 Julienne disc
36 Disc holder
important
Read this user manual carefully before you use the appliances and save it
for future reference.
Danger
- Never use the appliances on an induction cooker, stove, gas stove, oven
or other cooking device.
- Never immerse the base of the HomeCooker in water or any other
liquid, nor rinse it under the tap.
- Never immerse the motor unit of the Cutting Tower in water or any
other liquid, nor rinse it under the tap.
Warning
- Check if the voltage indicated on the appliances corresponds to the
local mains voltage before you connect the appliances.
- Only connect the appliances to an earthed wall socket.
- The appliances are not intended to be operated by means of an
external timer or separate remote-control system.
- Do not use the appliances if the plugs, the mains cords or other parts
are damaged.
- If the mains cord of the HomeCooker or Cutting Tower is damaged,
you must have it replaced by Philips, a service centre authorised by
Philips or similarly qualified persons in order to avoid a hazard.
- The Cutting Tower may not be used by children. Keep the Cutting
Tower and its mains cord out of reach of children.
- The Cutting Tower can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge
if they have been given instructions in safe use of the appliance or
supervision to establish safe use and if they have been made aware of
the hazards involved.
EnglisH
7