Philips GC625, User Manual, Page: 53 / 100

53
Problem Possible cause Solution
Water tank has
been overfilled.
Fill water up to its MAX
marking.
Steam lock cannot
be activated.
Fail to enter steam
lock function.
Double tap to activate
the steam lock function
( refer to ).
Steam does not
stop automatically
after placing the
steamer head
onto the holder.
Steam lock
function is
activated.
Press once to deactivate
steam lock ( refer to ).
The board cover
becomes wet or
there are water
droplets on the
garment during
steaming.
Steam has
condensed on the
board cover after
a long steaming
session.
Leave it to dry before
storage. Replace the
board cover if it has
worn out. Purchase a
new board cover from
a Philips Authorized
Service Center.
Board is shaky
during use.
The poles are not
installed properly
or the board is not
secured onto the
poles.
Refer to for correct
installation.
The board lock is
not fully inserted.
Insert the two board
locks fully until you hear
a “click” sound
( refer to ).
The board is not
fully secure in
vertical position.
Make sure that the board
tilting lever is in a locked
position before attaching
it to the poles
( refer to ).
Board cannot
be tilted.
Fail to press the
board tilting lever.
Press the board tilting
lever to tilt the board
( refer to ) .