Philips DVDR3575H/, Service Manual

Page: 109 / 195

Reference : SGP_AVS_SW_ATLAS-05-05 Classification : COMPANY RESTRICTED
Version : 0.17 Project : ATLAS_DSW
Status : Proposed Chapter : User Manual
Date : 2006-09-12 Section : Diagnostic Software (Leco+)
© Philips Electronics N.V. 2006
Philips Semiconductors Page 89 of 124
Nucleus Name
DS_FRE_ChannelSelect
Nucleus Number 2001
Description This nucleus sets the tuner to receive a valid audio and video signal
Technical
-
Parse the user input to determine all parameters to set
-
Pass these parameters to the respective parts using IIC
Execution Time Less than 1 second
User Input <Frequency*16> <video standard id> <Tuner>
Tuner frequency: to tune the tuner to e.g. 216 MHz, this parameter must be
3456. (Since 216*16 = 3456. This is to avoid the decimal points to the
parameter list.)
Video Standard ID: The table below shows which video standards are possible
ID Europe Nafta / Apac
0 PAL_BG_S NTSC
1 PAL_BG_M Invalid
2 PAL_I_M
Invalid
3 PAL_DK_S Invalid
4 PAL_DK_M Invalid
* Video Standard ID: For TCSM0601PD25F tuner only
ID Europe
0 PAL_BG
1 PA_I
2 PAL_DK
3 SECMA
L
4 SECAM L’
Tuner: Select the tuner type that you want to tune. This input is not mandatory.
(If no input is detected, tuner will be defined run-time (if recognised).)
* Refer to Video Standard ID table for TCSM0601PD25F tuner
Name Colour system Transmission
standard Sound modulation
PAL_BG_S PAL BG FM-Stereo
PAL_BG_M PAL BG FM-Mono / NICAM
PAL_I_M PAL I FM-Mono / NICAM
PAL_DK_S PAL DK FM-Stereo
PAL_DK_M PAL DK FM-Mono / NICAM
NTSC_M_S NTSC M FM-Stereo
Tuner Tuner ID Runtime Detected
1 FE1316 (Europe Philips) V
2 FE1319 (Europe Philips) V
3 TMQZ2-403A (Europe ALPS)
4 JS6B2-L121 (Europe Xuguang)
5 TCPK0601 (APAC Samsung)
6 TCMN0682 (NAFTA Samsung) V
7 TCPK0600 (APAC Samsung)
8 TCPD0601 (APAC Samsung)
9 VPC12R_ENG56PPG1F (Panasonic)
10 * TCSM0601PD25F (Europe Samsung)
11 TCSN9082PA26AF (Nafta Samsung)
Error Number Description
200100 Setting the tuner channel succeeded
200101 Invalid user input
200102 Getting the version of the set failed
200103 Configuration of the tuner failed
200104 Configuration of the IF module failed
Example DS:> 2001 3456 0 1
200100:
Test OK @
1
2