Philips DVDR3575H/, Service Manual

Page: 129 / 195

Reference : SGP_AVS_SW_ATLAS-05-05 Classification : COMPANY RESTRICTED
Version : 0.17 Project : ATLAS_DSW
Status : Proposed Chapter : User Manual
Date : 2006-09-12 Section : Diagnostic Software (Leco+)
© Philips Electronics N.V. 2006
Philips Semiconductors Page 109 of 124
Nucleus Name
DS_DTTM_ AvVideoStandardSet
Nucleus Number 2228
Description Configures the Mojo video channel to the given video standard.
Technical - Send the DTTM command ID 1501, together with supplied input value.
Execution Time < 1 sec.
User Input VideoStandard: Video standard to set the channel to (0=PAL, 1=SECAM)
Error Number Description
222800 Succeeded in configuring the Mojo video channel
222801 Insufficient number of input data supplied
222802 Non-existent video standard
222803 Configuring the Mojo video channel was not successful
222804 Communication with the DTT Module failed.
222805 DTT Module initialisation failed.
Example DS:> 2228 0
222800:
Test OK @
1
Nucleus Name DS_DTTM_ AvVideoOutputSet
Nucleus Number 2229
Description Configures the video output to the selected video standard.
Technical - Send the DTTM command ID 1504, together with supplied input values.
Execution Time < 1 sec.
User Input 1. VideoDAC : The video DAC to configure
0 = RGB / YUV / YC (TV DAC's)
1 = CVBS / Y (TV DAC)
2 = YC / CVBS (VCR DAC's)
2. VideoOutput: The video output to set the DAC's to
0 = RGB or CVBS or YC (resp. the chosen DAC's)
1 = YUV or YC or CVBS
2 = YC
Error Number Description
222900 Video output could be set successfully
222901 Insufficient number of input data supplied
222902 One of the parameter values is out of range
222903 Video output could not be set
222904 Communication with the DTT Module failed
222905 DTT Module initialisation failed.
Example DS:> 2229 0 1
222900:
Test OK @
2
Nucleus Name DS_DTTM_FreRegisterRead
Nucleus Number 2230
Description Reads a single byte of data out of a demodulator register.
Technical - Send the DTTM command ID 3601, together with supplied input value.
Execution Time < 1 sec.
User Input Address: register address to read from
Error Number Description
223000 The selected address register could be read successfully
223001 Insufficient number of input data supplied
223002 The register address value is out-of-range
223003 The selected address register could not be read
223004 Communication with the DTT Module failed
223005 DTT Module initialisation failed.
Example DS:> 2230 0x12
223000: The value of this register: 0x00
Test OK @
3