Philips DVDR3575H/, Service Manual

Page: 124 / 195

Reference : SGP_AVS_SW_ATLAS-05-05 Classification : COMPANY RESTRICTED
Version : 0.17 Project : ATLAS_DSW
Status : Proposed Chapter : User Manual
Date : 2006-09-12 Section : Diagnostic Software (Leco+)
© Philips Electronics N.V. 2006
Philips Semiconductors Page 104 of 124
Nucleus Name
DS_DTTM_FatalErrorClear
Nucleus Number 2212
Description Clears the fatal error database in the User EEPROM.
Technical
-
Send DTTM command ID 6304
Execution Time < 1 sec.
User Input None
Error Number Description
221200 Clearing the Fatal error list succeeded
221201 Fatal error list could not be cleared
221202 Communication with the DTT Module failed.
221203 DTT Module initialisation failed.
Example DS:> 2212
221200:
Test OK @
1
Nucleus Name
DS_DTTM_FactoryBitSet
Nucleus Number 2213
Description The factory bit is set in the user EEPROM.
Technical
-
Send DTTM command ID 6203
Execution Time < 1 sec.
User Input None
Error Number Description
221300 Setting the Factory bit succeeded
221301 Factory bit could not be set
221302 Communication with the DTT Module failed
221303 DTT Module initialisation failed.
Example DS:> 2213
221300:
Test OK @
2
Nucleus Name
DS_DTTM_PllVcxoFrequencySet
Nucleus Number 2214
Description Set the PLL/VCXO frequency values of the processor. The M, N, and P values
determine the PLL’s clockspeed.
Technical
-
Send DTTM command ID 3101, with the given parameters.
Execution Time Approx. 2 sec.
User Input 1. PLLNumber: The seq. nr of PLL to be changed [0,3]
2. Mvalue : PLL M value [0x1,0x7FF]
3. NValue : PLL N value [0x1,0xFF]
4. Pvalue : PLL P value [0x1,0x1F]
Error Number Description
221400 Setting the PLL/VCXO parameter values was successful
221401 Insufficient number of input data supplied
221402 One of the parameters not within range
221403 The PLL/VCXO values could not be set
221404 Communication with the DTT Module failed.
221405 DTT Module initialisation failed.
Example DS:> 2214 0 0xef 0x03 0x01
221400:
Test OK @
3