Philips DVDR3575H/, Service Manual

Page: 126 / 195

Reference : SGP_AVS_SW_ATLAS-05-05 Classification : COMPANY RESTRICTED
Version : 0.17 Project : ATLAS_DSW
Status : Proposed Chapter : User Manual
Date : 2006-09-12 Section : Diagnostic Software (Leco+)
© Philips Electronics N.V. 2006
Philips Semiconductors Page 106 of 124
Nucleus Name
DS_DTTM_IicRead
Nucleus Number 2217
Description Performs an IIC read action on the DTT module.
Technical
-
Send DTTM command ID 2901 with the supplied parameters, separated by
a single space character.
Execution Time < 1 sec.
User Input 1. IicChannel : IIC channel of the device
2. IicDeviceAddress : address of IIC device to read from
3. NrOfSubAddressBytes: number of sub-address bytes (=x)
4. SubAddressBytes : x sub-address bytes
5. NrOfValues : number of values to read (=y)
Error Number Description
221700 The test was successful
221701 Insufficient number of input data supplied
221702 No response from the given device-address
221703 Incorrect device address was given
221704 Unable to send IIC start-condition
221705 Error during read from IIC-address
221706 Device does not support IIC read
221707 The IIC read action failed.
221708 Communication with the DTT Module failed.
221709 DTT Module initialisation failed.
Example DS:> 2217 0x00 0x10 2 0x00 0x00 2
221700: Read values: 0x17 0x00
Test OK @
1
Nucleus Name DS_DTTM_AvTsPidSet
Nucleus Number 2218
Description Sets the PID values of the transport stream.
Technical
-
Send the DTTM command ID 1503, with the supplied parameters.
Execution Time < 1 sec.
User Input 1. Video PID value [0x0000-0x1FFF]
2. Audio PID value [0x0000-0x1FFF]
3. PRC PID value [0x0000-0x1FFF]
Error Number Description
221800 The TS PID's are set successfully
221801 Insufficient number of input data supplied
221802 One or more PID values is out of range
221803 The TS PID's could not be set.
221804 Communication with the DTT Module failed
221805 DTT Module initialisation failed.
Example DS:> 2218 0x79 0x7a 0x79
221800:
Test OK @
2
Nucleus Name DS_DTTM_AvMojoBeepOn
Nucleus Number 2219
Description Generates the Mojo beep.
Technical
-
Send the DTTM command ID 1605.
Execution Time < 1 sec.
User Input None
Error Number Description
221900 The Mojo beep has been turned on successfully
221901 Can not start another AV test (one is already running)
221902 The Mojo beep could not be turned on
221903 Communication with the DTT Module failed
221904 DTT Module initialisation failed.
Example DS:> 2219
221900:
Test OK @
3