32
Manually setting the time & date
If the time is incorrect, this could be due to a weak or disrupted TV signal. If this is the case,
switch off the automatic function.
Attention!
If data from the GUIDE PLus+
®
system were loaded, you can not change the clock/date because
this information was taken from the GUIDE Plus+
®
system. Therefore you can not select this
function.
1
Press
SYSTEM-MENU
on the remote control. The menu bar
will appear.
2
Select '
A
' using
D
or
C
.
3
Select line '
Installation
' using
CH-
B
or
A
CH+
and confirm
with
C
.
4
Select line '
Time/Date
' using
CH-
B
or
A
CH+
and confirm
with
C
.
a
'
Not allowed
'will appear on the TV screen
b
The time/date will automatically be taken from the EPG information.
Therefore you can not set the time/date manually.
Problem
5
Select '
Manual
' with
CH-
B
or
A
CH+
.
6
Confirm with
OK
.
Time/Date
Manual
Time
09:02
AM/PM
AM
Year
2003
Month
01
Date
01
Daylight Saving
Off
To exit press
SYSTEM MENU
7
Change the time in line '
Time
' using the number buttons
0..9
on
your remote control.
8
Check '
AM/PM
', '
Year
', '
Month
', and '
Date
' in the same way.
To select between the fields, use
CH-
B
or
A
CH+
.
Change the information with
D
,
C
or the number buttons
0..9
.
9
Select one of the following settings in line '
Daylight Saving
':
'
On
': The time set corresponds to the summer time (summer
time is on)
'
Off
': The time set corresponds to the winter time (summer time
is off)
10
When all settings are correct, confirm with
OK
.
11
To end, press
SYSTEM-MENU
.
If the setting has been confirmed with
OK
the automatic system is disabled.
Installing your DVD Recorder
