82
6
The decoded data appears after confirmation.
Changing the start/end times
1
Use
CH-
B
or
A
CH+
to select the line (programmed recording)
where you want to change the times.
2
Press
OK
.
3
Select '
Start early by
' or '
End late by
' using
A
CH+
or
CH-
B
.
Enter the information in the line using the
0..9
number buttons on
the remote control.
4
Confirm with
OK
.
This takes you back to the listing.
Setting up repeat recordings
You can choose from the following settings with the green function
button:
Frequency
:
'
Once
'
: one-time recordings
'
Daily
'
: Repeated daily recordings from Monday to Friday.
'
Weekly
'
: Repeated weekly recordings (every week on
the same day).
'
Off
'
: this will stop any future occurrences of the program
from being recorded but will keep the show in the list.
Entering the recording quality
You can choose with the
REC MODE
button.
Quality
:
Recording quality '
M1
,
M2
,
M2x
,
M3
,
M4
,
M6
,
M8
'.
Tip
7
If
all
information is
correct,
press
the
OK
button.
The
information will be stored.
8
To end, press the
GUIDE/TV
button.
9
Insert a recordable disc in the Recorder.
The disc is checked.
10
Locate on the disc the position where you want to start the
recording. Press
STOP
h
.
If any of the TIMER blocks are in use, '
TIMER
' will light up on the display.
Programming a recording (TIMER)