26
Installation
Auto Ch. Programming
Searching for TV channels
000 Channels found
Please wait
8
When the channel search is completed, '
Auto ch. search
complete
' will appear on the TV screen.
9
Press
SYSTEM-MENU
repeatedly to remove all the menus
from the screen.
a
Very few TV channels were found
b
During 'Automatic channel search' the DVD Recorder detects
whether an antenna or a cable TV signal is connected. If you have
connected a cable TV signal but found very few TV channels, you
must search the channels manually.
1
To do so, select '
Cable/Antenna
' instead of line '
Auto Ch.
Programming
' in step
6
and confirm with
C
.
2
If you select '
Cable
', channels 1-125 will be available.
If you select '
Anten.
', channels 2-69 will be available.
Select your type of connection by pressing
C
repeatedly:
'
Anten.
', '
Cable
' or '
Auto.
' automatically detects which one you
have.
3
Confirm the setting with
OK
.
4
Press
SYSTEM-MENU
to go to the next menu. Press
OK
to
start channel search as prompted by the on-screen message. When
the channel search is complete, press
SYSTEM-MENU
repeatedly
to remove all the menus.
Problem
You can read about how to search for a TV channel manually in the following section 'Adding
and deleting TV channels manually'.
Installing your DVD Recorder