Pharos Traveler 619, User Manual, Page: 15 / 181

Pharos Traveler 619 Pharos Traveler 619
15
Tips for using the QWERTY keypad:
The “Fn” key is used to access the symbols in blue and numbers on the keypad. You can choose either of the
three methods to input symbols/numbers:
(1) Press the “Fn” key once ( ), the next character you enter will be a symbol or number.
(2) Press the “Fn” key twice ( ), all key-presses will input numbers and symbols.
(3) Hold down the “Fn” key and press another key at the same time to enter its corresponding symbol.
To de-activate mode, press the “Fn” key once while in mode.
(1) Press this key once ( ), the first letter you enter will be capitalized.
(2) Press this key twice ( ), all letters you enter will be capitalized.
(3) Hold down this key and press another key at the same time to enter capital letters constantly.
In mode, press this key again to enter lower case letters.
You can input symbols and accented letters by using this key. After pressing a character, press the “Sym” key
repeatedly, you can see all accent types of this character being displayed in sequence cyclically. Stop pressing
the “Sym” key while the desired character shows. Please refer to the table in the next page for corresponding
symbols and accented letters for each character.
Press this key to erase the letter to the immediate left side of the cursor. Press the “Fn” key once and then press
this key to delete the first letter to the right side of the cursor.