Pharos 565 Series, User Manual, Page: 60 / 81

60
4. Select the device that you want to add and tap Next . If the device you are looking
for does not appear in the list, tap Refresh .
5. In Passcode , enter an alphanumeric passcode between 1 and 16 characters, and
then tap Next . Otherwise, leave the passcode blank. For security reasons, it is
strongly recommended that you use a passcode.
6. Enter the same passcode on the other device (there will be a prompt to do so).
7. Select the service to use from the partner device, tap Finish .
Receiving a File
1. Refer to the previous section to establish a Bluetooth partnership.
2. Tap
Start > Settings > Connections > Beam .
3. Select Receive all incoming beams , and then tap OK .
4. Tap Start > Settings > Bluetooth .
5. On the Mode tab, tap Make this device visible for other devices .
6. On your PC (or other Bluetooth-enabled devices), locate the file or item you want to
send. For example, on your PC, you would use Windows Explorer to locate the file.
7. In the example above, right-click the file and select the destination device under “to
Bluetooth”.
8. Tap Yes when the device prompts about receiving a file.
9. After the transmission process is finished, the file should be saved in My
Documents on the device.
Beaming an Item
Once you create a partnership, the two partnership Bluetooth-enabled devices don’t
need to be discoverable to communicate. You can beam files and information such as
contacts, pictures, tasks, appointments, voice notes, and files to other devices using
Bluetooth.
1. Tap Start > Settings > Bluetooth .
2. On the Mode tab, select Turn on Bluetooth .
3. Select an item you want to beam. For example, open a task in Tasks.
4. Tap
Menu > Beam .