Pharos 565 Series, User Manual, Page: 16 / 81

16
1.4 Turning On/Off the Device
• When the device is off: press the Power key to turn on the device.
• When the device is turned on: press the Power key to switch the device into sleep mode.
• When the device is in sleep mode: press the Power key to wake up the device.
• To turn off the device completely, press and hold the Power key for a few seconds, and
then tap Yes to confirm turning off the device.
1.5 Calibrating the Device
Calibrating the device ensures that the screen will correctly respond to your stylus and
fingers. When you turn on the device for the first time, you will be asked to calibrate the
device. If you would like to re-calibrate the device, follow the steps below:
1. Tap
Start > Settings > System > Screen .
2. Tap the Align Screen button and then follow the on-screen instructions.
1.6 Resetting the Device
Soft Reset
If the device is not performing properly, such as running slower than normal, you can soft
reset it to shut down all active programs and restart the device.
To perform a soft reset, use the stylus tip to press the Reset button located at the side of
the device.
Factory Reset
It is suggested to perform a hard reset only if a soft reset does not work. The device will
be restored to its default settings after having a factory reset. To perform a hard reset,
tap
Start > Settings > System > Factory Reset , and then follow the instructions on the
screen.
Please remember to backup any additional installed programs and user data before
performing a factory reset; otherwise, all of them on the device will be lost.