Mixing pump RITMO L Eco Overview - Operation
Changing the pump / Cleaning the pump
12 April 2019 13:43:00
59
49 Changing the pump / Cleaning the pump
49.1 Lay the machine on its back
Fig. 92: Tilting the machine
1. Secure the machine against switching on by removing the
connection cable.
NOTE!
For easier pump replacement or to clean the
pump, RITMO can be laid on its back.
Fig. 93: Remove pump unit
2. Loosen the screws (1).
3. Remove and clean the pump unit (2) with mortar pressure
gauge.
4. Insert the cleaned rotor and stator or the new pump unit and
fasten the screws back on.
5. Ensure that the stator in the material container is properly fitted.
NOTE!
Only store assembled pump (rotor in stator) for a
few days as rotor and stator can get connected
inseparably in case of prolonged storage.
1
2