![Pfeiffer Vacuum PrismaPro QMA 250 F1 Translation Of The Original Download Page 4](http://html1.mh-extra.com/html/pfeiffer-vacuum/prismapro-qma-250-f1/prismapro-qma-250-f1_translation-of-the-original_1534986004.webp)
5.6.1 IP addresses
5.6.2 Sub-networks
5.6.3 Changing the PrismaPro IP address
5.6.4 Changing the host computer IP address
5.7
5.7.1 Connecting each individual PrismaPro
5.7.2 Connecting several PrismaPro devices
5.8
6
6.1
6.2
7
7.1
7.2
8
9
9.1
9.2
9.3
Maintaining the analyzer QMA 250
9.3.1 Visually inspect the QMA 250 analyzer
9.3.2 Baking out the analyzer
9.4
9.4.1 Replacing the filament unit of the open ion source
9.4.2 Replacing the filament unit of the crossbeam ion source
9.4.3 Replacing the filament unit of the grid ion source
9.5
9.5.1 Replacing the open ion source
9.5.2 Replacing the cross beam ion source
9.5.3 Replacing the grid ion source
9.6
Calibrating high frequency and the mass scale
9.6.1 Factory calibration
9.6.2 Attaining a stable operating temperature for PrismaPro
9.6.3 Selecting the gas mixture for the mass calibration
9.6.4 Setting high frequency for both polarities
9.6.5 Perform mass calibration (TUNE)
9.6.6 Calibrating with a test gas mixture
9.6.7 Calibration with process gases
9.6.8 Calibration of the helium leak detection
10
10.1 Troubleshooting
10.1.1Remedying system and communication errors
10.1.2Remedying hardware errors
10.1.3Remedying operating and measuring errors
10.1.4Calling software error messages from PV MassSpec
10.2 Contacts on QMA 250 and QME 250
10.3 Checking the QMA 250 analyzer
11
12
12.1 General disposal information
12.2 Dispose of a compact mass spectrometer
13
Service solutions by Pfeiffer Vacuum
14
Table of contents
4/86