Pfaff 3588-05/020, Instruction Manual, Page: 51 / 190

Sewing
51
10
.03
Sewing with sequences
To sew with sequences, parameter " 114 " must be set at value " 1 ", see Chapter
13.10.02 List of parameters.
●
Switch on the machine.
●
Select the desired sequence, see Chapter 9 . 06 . 01 Selecting a sequence.
●
Insert the pre-cut parts.
●
Start the program cycle by pressing the double start keys, see Chapter 7 . 04 Double start
keys.
Description of the functions
Program number selection
This function opens the menu for entering the program number. The current program num-
ber is shown in the symbol. If the function for moving automatically to the next sequence is
activated, the sequence symbol is shown as inverse.
Standard stitch length
This function opens the menu for entering the standard stitch length. The current stitch
length is shown in the symbol.
Maximum speed
This function opens the menu for entering the maximum speed. The current maximum
speed is shown in the symbol.
Input menu
This function is used to call up the "input mode" see Chapter 11 Input.
Individual program
This function depends on the setting of parameter " 112 " (moving automatically to next se-
quence), see Chapter 13 . 10 . 02 List of parameters.
If the function for moving automatically to the next sequence is activated (value "I", this)
function is used to show the symbol for the next individual program to be sewn as inverse.
If the function for moving automatically to the next sequence is deactivated (value " 0 ",) this
function is used for the quick selection of the highlighted seam programs.
Daily piece counter
Here the day number of pieces is indicated.