Pfaff 3588-05/020, Instruction Manual, Page: 50 / 190

Sewing
50
Daily piece counter
Here the day number of pieces is indicated.
Automatic / manual sewing
This function is used to switch between automatic and manual sewing. The appropriate sym-
bol of the current operating mode is shown respectively.
Bobbin thread stitch counter
This function opens the menu for entering and resetting the number of stitches for the bob-
bin thread, see Chapter 9 . 09 Setting the bobbin thread stitch counter .
Jig up/down
This function is used to raise or lower the jig.
Sewing foot up/down
This function is used to raise or lower the sewing foot. In addition the thread trapper is ope-
ned or closed.
Stand height adjustment
This function opens a menu for adjusting the stand height (only when the machine is in its
basic position).
Bobbin change
This function makes it possible to change the bobbin.
Stacker up/down
This function is used to open or close the stacker.
Sewing start
This function is used to start the sewing operation.
Basic position
This function is used to move the machine to the basic position.
Tacting backwards
This function is used to move backwards in sections in the seam pattern tact for tact. The
seam cycle is sewn automatically, if the function is pressed longer.
Tacting forwards
This function is used to move forwards in sections in the seam pattern tact for tact. The
seam cycle is sewn automatically, if the function is pressed longer.
Single step (after pressing the double start keys)
This function is used to move the folder and jig feed tact for tact.