Pfaff 3588-05/020, Instruction Manual, Page: 46 / 190

Preparation
46
9
.11
Loading the pre-cut parts
Fig. 9 - 07
●
Switch on the machine.
●
Place the pre-cut parts on the loading table or slide them onto the pocket plate and align
them.
The insertion and alignment of the pre-cut parts depends on the selected menu
combination, see Parameter 113 and 114 in Chapter 13.10.02 .
Menu combination: "Basic position pocket plate front/plain-materialfabric on"
●
Slide the pre-cut pocket part onto the pocket plate according to Fig. 9 - 07 .
Menu combination: "Basic position pocket plate back/plain-fabric on"
●
Actuate the loading function switch twice pocket plate moves forward.
●
Slide the pre-cut pocket part onto the pocket plate according to Fig. 9 - 07 .
Menu combination: "Basic position pocket plate front/plain-materialfabric off"
●
Slide the pre-cut pocket part onto the pocket plate according to Fig. 9 - 07 .
●
Activate the inserting function switch - the pocket plate is lowered.
●
Activate the inserting function switch to raise the pocket plate so that the trousers cutting
can be aligned.
●
Activate the inserting function switch to lower the pocket plate again.
Menu combination: "Basic position pocket plate back/plain-fabric off"
●
Actuate the loading function switch to move the pocket plate forward.
●
Slide the pocket cutting onto the pocket plate according to Fig. 9 - 07 .
●
Actuate the loading function switch twice: the pocket plate is lowered and raised slightly
to allow positioning of the pre-cut trouser part.