Pfaff 3586-22/02 Instruction Manual Download Page 52

Page: 52 / 158

Input

Info

This function opens a menu to display the following information:

- Current software status of the machine

- Current fi rmware status of the machine

- Current fi rmware status of the control panel

- Current fi rmware status of the main drive

- Daily piece counter

- Operating hours counter

- Production hours counter

The daily piece counter can be reset with the "

Clear

" function.

Country settings

This functions opens a menu to select the language displayed on the control panel,

see

chapter 8.04 Selecting the language

Rights of access

This function opens a menu to defi ne the rights of access, see

chapter 11.05

Rights of access

Stepping motors: X / Y-direction (carriage)

This function opens a menu to move the carriage stepping motors.

Stepping motors: depth

This function opens a menu to move the stepping motor for the depth.

Sewing motor

This function opens a menu to test and adjust the sewing motor, see

chapter 13.10 Sewing

motor settings

Service menu

This function is used to call up the menu for selecting various service functions, see

chapter 13.09 Service menu

Summary of Contents for 3586-22/02































































































































































Search results

Summary of Contents for 3586-22/02

Reviews:

Pfaff 3586-22/02, Instruction Manual, Page: 52 / 158

Search results

Summary of Contents for 3586-22/02

Reviews: