Pfaff 3586-22/02, Instruction Manual, Page: 116 / 158

Adjustment
116
13
.10
Service menu
The states of the digital inputs are displayed in the service menu. The outputs can be set
or reset manually. In addition, it is also possible to call up functions for carrying out a cold
start, for loading the operating program, for setting the control panel and for setting the zero
points.

Switch the machine on.

Call up “Input” mode.

Call up the service menu.
Description of the functions
Input mode
This function is used to change the initial status of input mode.
Conclude the input
This function is used to conclude the input and the machine switches to sewing mode.
CAN nodes
This function is used to select the CAN node; the selected CAN node is shown inversely.
Special functions
This function is used to select the special outputs; the symbol is shown inversely for the
selected function.
Plus/minus keys
These functions are used to sett () or reset (-) the selected output.
Arrow keys
These functions are used to select the desired outputs.
Cold start
This function is used to perform a cold start, see chapter 13 . 09 . 01 Cold start .
Load the operating program
This function is used to load the machine operating program, see chapter 13 . 09 . 02 Load-
ing / updating the operating program .