Pfaff 3586-22/02, Instruction Manual, Page: 28 / 158

Set-up and Initial Start-up
28

Loosen the screws 4 if necessary and align the bracket 3 of the guide rollers according to
rule 1 .

Tighten the screws 4 .

Remove the adjustment pin 1 and the adjustment gauge 2 .

Mount the workholder bar and sewing foot.

Call up the "Carriage position" function.

Remove the workholder bar and sewing foot and move to the carriage position.

Remove the needle, insert the adjustment pin 1 into the needle bar and place the adjust-
ment gauge 2 on the cover plate.

Move the stepping motors using the corresponding arrow symbols according to the rules
and press “Enter” to accept the setting.