Pfaff 3586-22/02, Instruction Manual, Page: 137 / 158

Control unit
137
14
.02.04
Conversion errors
(free programming)
Display Description
1 Incorrect machine code
2
“Clamp type” section or “Obstacle” section missing or at incorrect
position
3 Increment too large
4 Program end without thread trimming
5 Impermissible stitch length specifi cation
6 Incorrect element in geometric data set
7 Rapid motion although machine is sewing
8 Impermissible stitch length specifi cation
9 Impermissible stitch length specifi cation
10 Circle control point - circle end point
11 Division by zero
12 Impermissible stitch length specifi cation
13 No coordinate section before Bezier curve
14 Sewing area limit exceeded
15 Curve without end point
16 Machine function buffer overfl ow
17 Sewing command in loading point program
18 Incorrect Bezier curve
19 Incorrect Bezier curve
20 Incorrect Bezier curve
21 Incorrect Bezier curve
22 Stitch length not initialised
23 Loading point program not completed
24 Stitch width command in loading point program
25 Impermissible value for stitch direction section
26 Trimming command, although thread trimmed
27 Sewing command, although machine is sewing
28 Trimming command in sewing off range
29 Sewing off command, although thread trimmed
30 Trimming command directly after sewing command
31 Front backtack too long