Pfaff 3582-2/01, Instruction Manual, Page: 57 / 104

Adjustment
12 - 1
12 Adjustment
12
.01
Notes on adjustment
All following adjustments are based on a fully assembled machine and may only be carried
out by expert staff trained for this purpose.
Machine covers, which have to be removed and replaced to carry out checks and
adjustments, are not mentioned in the text.
The order of the following chapters corresponds to the most logical work sequence for
machines which have to be completely adjusted. If only specific individual work steps are
carried out, both the preceding and following chapters must be observed.
Screws and nuts indicated in brackets ( ) are fastenings for machine parts, which must be
loosened before adjustment and tightened again afterwards.
12
.02
Tools, gauges and other accessories
●
1 set of screwdrivers with blade widths from 2 to 10 mm
●
1 set of wrenches with jaw widths from 6 to 22 mm
●
1 set of Allan keys from 1.5 to 6 mm
●
1 universal screwdriver with exchangeable blades
●
1 metal ruler
●
1 needle rise gauge, Part no. 61-111 600-01
●
1 screw clamp, Part no. 08-880 137 00
●
Sewing threads and test material
●
Needles
12
.03
Abbreviations
t.d.c. = top dead centre
b.d.c. = bottom dead centre