Pfaff 3582-2/01, Instruction Manual, Page: 37 / 104

9 - 3
Setting up
9
.03
Changing the bobbin / adjusting the bobbin thread tension
Fig. 9 - 03
●
Once the number of stitches entered beforehand has been reached, the corresponding
symbol appears on the screen and the sewing operation stops, see Chapter 10.02 Error
signals .
●
To change the bobbin, switch off the machine.
●
Open the folding unit and cover plate.
●
Pull up latch 1 and remove the empty bobbin.
●
Place the filled bobbin in the hook, so that it moves in the direction of the arrow when the
thread is pulled out.
●
Close down latch 1 .
●
First lead the thread through slot 2 and then around the finger of the bobbin case.
●
Adjust the bobbin thread tension by turning screw 3 .
●
Replace the folding unit and the cover plate.
●
Acknowledge the bobbin change by pressing the error signal.
1
3
2
+
-