Pfaff 3568-12/22, Instruction Manual, Page: 93 / 142

Adjustment
13
.06.19
Needle guard position
Requirement
The needle guard finger
1
must
1. not strike against the thread guard nor the bobbin case base.
2. when at its back point of reversal, be at a distance of
0.5 mm
to the needle.
●
Adjust the height of the needle guard
1
by adjusting the needle guard bracket
2
(screws
3
) according to
requirement 1
.
●
By turning the handwheel, position needle guard
1
at its front point of reversal.
●
Adjust the needle guard bracket
2
(screws
4
) according to
requirement 2
.
Fig. 13 - 21
1
2
3
4
0.5 mm
13 - 22