Pfaff 3568-12/22, Instruction Manual, Page: 55 / 142

11 - 11
Programing
3- AIRBLAST SELECTION
Airblast functions are listed here which can be turned on or off via the
number keys 1
or
0
.
1- NEEDLE COOLING (AIRBLAST), FEED FORWARD
When the function is active, it prevents the starting thread from being pushed
under the presser during fabric transport to the sewing station.
2- NEEDLE COOLING (AIRBLAST), STACKER
Airblast during stacker operation.
3- AUX. FEED, FEED FORWARD
Airblast during fabric transport to sewing station.
4- AUX. FEED, STACKER
Airblast during stacker operation.
5- AUX. FEED, SEWING
Airblast during sewing operation.
4- OTHER FUNCTIONS
Under this subfunction are other subfunctions which can be turned on or off with the
number keys 1
or
0
.
1 - THREAD PULLER
Increases the amount of thread when starting sewing.
2 - BOBBIN CHANGE FROM TOP
Sewing head tilts up automatically for changing the bobbin.
3 - JIG MONITOR (option)
4 - LABEL FEEDER (option)
The label is fed automatically.
5 - LABEL ALTERNATELY (option)
The label is fed automatically during every other folding operation.
6- CARRIAGE MOVEMENT
When this function is on, the carriage moves continously during sewing.
When this function is on, the carriage moves intermittently, e. g. when the needle
is in the material the carriage feed stops.
7 - SLOW TRIGGERING
The triggering speed of the sewing jig from zero point to sewing on point is
reduced to prevent thin material from shifting.
8 - HOME POSITION POCKET PLATE IN FRONT
When this function is on, the pocket plate moves automatically forward for
inserting the pocket cutting.
When the function is not active, the pocket plate moves forward only after the foot
switch has been pressed.