Pfaff 3568-12/22, Instruction Manual, Page: 46 / 142

11 - 2
Programing
11
.01.03
Summary of the functions in the 2nd menu level
Functions which are used less frequently are found in this menu level. Here, the functions
are divided into main and subfunctions.
1 - PROGRAM MANAGEMENT
2 - SEAM PATTERN PROGR. / CORRECTION
3 - COUNTERS
4 - SWITCH FUNCTIONS
5 - TIMES
6 - SERVICE
1 - PROGRAM DIRECTORY
2 - READ PROGRAM FROM DISK
3 - DELETE PROGRAM
4 - WRITE PROGRAM ON DISK
5 - STATISTICAL PROGRAM DATA
6 - FORMATTING DISK (DELETE)
7 - DATA TRANSFER WITH PC
1 - REM. STITCH COUNT, NDL.THR. MON.
2 - REM. STITCH COUNT, BOBBIN THR.MON.
3 - MONITORING STITCHES, NDL.THR.MON.
4 - AUTOMATIC STITCH REVERSE
5 - SLOW STARTING STITCHES
6 - CARRIAGE START (NIS)
1 - THREAD MONITOR FUNCTIONS
2 - LANGUAGES
3 - AIRBLAST SELECTION
4 - OTHER FUNCTIONS
7 - TIME FOR THREAD PULLER
1 - SEWING MOTOR FUNCTIONS
2 - STEPPING MOTORS
3 - DISPLAY INPUTS
4 - SET / RESET OUTPUTS
7 - COLD START
5 - SET ZERO POINT
2 - READ ALL PROGRAMS FROM DISK
1 - DELETE ONE PROGRAM (MEMORY)
2 - DELETE ALL PROGRAMS (MEMORY)
3 - DELETE ONE PROGRAM (DISK)
3 - BOBBIN SENSOR
1 - GERMAN
2 - ENGLISH
3 - FRENCH
4 - SPANISH
5 - ITALIAN
5 - AUX. FEED, SEWING
1 - THREAD PULLER
2 - BOBBIN CHANGE FROM TOP
1 - STEPPING MOTOR X-AXIS
2 - STEPPING MOTOR Y-AXIS
2 - DISK DIRECTORY
3 - JIG MONITOR
1 - READ ONE PROGRAM FROM DISK
1 - MEMORY DIRECTORY
4 - DELETE ALL PROGRAMS (DISK)
1 - TIME FOR STACKER AIRBLAST
8 - BAS. FRONTPOS. P.-PL.
3 - AUX. FEED, FEED FORWARD
1 -
NEEDLE COOLING (AIRBLAST), FEED FORWARD
1 - THREAD MONITOR
2 - WRITE ALL PROGRAMS ON DISK
1 - WRITE ONE PROGRAM ON DISK
1 - SEWING MOTOR TURNING
2 - TRIMMER SPEED SELECTION
3 - THREAD TRIMMING SEQUENCE
Display: "2. MENU #300" (basic condition 2nd menu)
2 - TIME FOR FOLDER DOWN
3 - TIME FOR PULLER DOWN
4 - TIME AFTER TABLE UP
5 - TIME FOR EDGE FOLDERS
6 - TIME FOR FEED FORWARD
6 - SOFTWARE DATE
2 - BOBBIN MONITOR
2 - NEEDLE COOLING (AIRBLAST), STACKER
4 - AUX. FEED, STACKER
4 - LABEL FEEDER
5 - LABEL ALTERNATELY
6 - CARRIAGE MOVEMENT
7 - SLOW TRIGGERING