Pfaff 3568-12/22, Instruction Manual, Page: 50 / 142

11 - 6
Programing
11
.04
Explanation of the menu functions
11
.04.01
Functions in the 1st menu level
1- PIECE COUNTER
Provides information on the current daily production (max. display value: 65565).
The value can be reset to "
0
" with the
Clear key
.
The value is not changed when the machine is turned off. If the max. display value is
exceeded, the counter is reset automatically.
2- BOBBIN PRESELECT
When the preset stitch count is reached, the machine stops automatically at the end of the
seam pattern to change the bobbin. When this function is selected, the value entered is
displayed.
The value can be changed using the
plus/minus keys
or the
number keys
.
3- TIME FOR FEED ROLLER
When this function is selected, the running time of the feed rollers for stacking is displayed
in seconds.
The running time can be changed via the
plus/minus keys
or the
number keys
. The running
time is a function of the length of the workpiece and should be set so that the pieces are
stacked in the middle of the stack trestle.
Fig. 11 - 01
. . .
increase running
time
decrease running
time
running time
correct
. . .
070
4- MAXIMUM SPEED
When this function is selected, the max. speed which has been set is displayed.
The value can be changed using the
plus/minus keys
or the
number keys
.
5- REDUCED SPEED
When this function is selected, the reduced speed which has been set is displayed.
The value can be changed using the
plus/minus keys
or the
number keys
.
070
workpieces
stack trestle