Pfaff 3568-12/22, Instruction Manual, Page: 54 / 142

11 - 10
Programing
6- CARRIAGE START (NIS = needle in material)
Needle in material,
continuous area of
180°
The command for the carriage start is output when the needle pierces the material.
However, the carriage actually starts when the needle leaves the material (constant 180°
later). The point in time for the output of the carriage start command can be changed in
the range of 0 - 360°.
Under certain conditions, the stitch formation can be influenced by the setting.
To avoid thread disturbances, the value should be between
60°
and
120°
.
4- SWITCH FUNCTIONS
Under this main function, the user can program machine functions according to his
requirements in the subfunctions.
1- THREAD MONITOR FUNCTIONS
Thread monitor functions are listed here which can be turned on or off via the
number keys 1
or
0
.
1- THREAD MONITOR
2- BOBBIN MONITOR
3- BOBBIN SENSOR (option)
2- LANGUAGES
Several languages are listed here from which the desired user language can be selected.
1- GERMAN
2- ENGLISH
3- FRENCH
4- SPANISH
5- ITALIAN
Fig. 11 - 04
Needle at TDC
0°
Needle pierces material,
carriage stops,
command for carriage
start is output
approx. at 90°
Needle leaves
the material,
carriage start
approx. at 270°