Pfaff 3568-12/22, Instruction Manual, Page: 51 / 142

11 - 7
Programing
6- ZIGZAG DELAY ON
Displays the stitch count according to which the command "Zigzag on" is output before the
bar tack is started. The stitch count can be changed using the
plus/minus keys
or the
number keys
(see
Fig. 11.02
).
7- ZIGZAG DELAY OFF
Displays the stitch count according to which the command "Zigzag off" is output before the
end of the bar tack. The stitch count can be changed using the
plus/minus keys
or the
number keys
(see
Fig. 11.02
).
Fig. 11 - 03
. . .
Fig. 11 - 02
Zig-Zag off
Zig-Zag on
Delay
correct
Delay too
short,
increase stitch
count
Delay
correct
Delay too
short,
increase stitch
count
Delay too
long,
decrease
stitch count
Delay too
long,
decrease
stitch count
Due to the delay of the valve and cylinder, output of the commands for DELAY
ZIGZAG ON and OFF must be delayed as a function of the speed.
8- INTERMEDIATE STOP
When this function is selected, the display shows whether the function is on or off. In the
AUTOMATIC
mode, the function causes a program stop after the folding operation is
completed. After pressing both start controls the program is continued. Via the
number
keys 1
and/or
0
, the function can be turned on or off.
9- PULLER
The puller is a work aid for stacking short workpieces.
When the function is selected, the display indicated whether this function is on or off. Via
the
number keys 1
and/or
0
, the function can be turned on or off.
0- PLAIN FABRIC
This function changes the foot switch and start control functions for processing plain fabric.
When the function is selected, the display indicates whether the function is on or off.
Via the
number keys 1
and/or
0
, the function can be turned on or off.
070