
Safety
8
1
.03
Safety symbols
Hazard point!
Special points of attention
Risk of injury to operating personnel and technical staff!
Danger area due to laser beam!
Attention!
Do not operate without the finger guard and safety cov-
ers!
Turn off the main switch
before set-up, maintenance
and cleaning work!
Only one person in the work area!
Only one person may be in the work area of the machine during operation!
Do not lean on!
The feed mechanism can be damaged if you lean on the infeed table!
1
.04
Special points of attention for the owner-operator
●
This instruction manual is a part of the machine and must be made available to the
operating personnel at all times.
●
The instruction manual must have been read before the initial start-up.
●
The operating personnel and technical staff must be instructed about the machine's
safety covers and about safe working methods.
●
The owner-operator may only operate the machine in a flawless condition.
●
The owner-operator must ensure that no safety covers are removed or disabled.
●
The owner-operator must ensure that only authorised persons work on the machine.
Additional information can be requested from the responsible sales centre.
Summary of Contents for 3519-5/01
Page 38: ...Sewing 38 Double point darts Fig 10 02 0 320 mm 0 320 mm Insertion mark Insertion mark...
Page 155: ...155 91 191 499 95 Part 7 Version 07 02 12 Circuit Diagram Overview Start 2 Start 1 Air okay...
Page 156: ...156 Circuit Diagram Overview Version 07 02 12 91 191 499 95 Part 8 A12 CAN3...
Page 157: ...157 91 191 499 95 Part 9 BDF P1 Version 07 02 12 Circuit Diagram Overview RS232 interface...