Pfaff 3519-5/01, Instruction Manual, Page: 20 / 158

Set-up and Initial Start-up
20
8 Set-up and Initial Start-up
The machine may only be set up and started up by qualified personnel! All of
the relevant safety regulations must always be complied with in this process!
8
.01
Set-up
Suitable electrical and compressed air supply connections must be provided at the erection
site, see
chapter 3 Technical Data . The erection site must also have a firm and level
subsurface and adequate lighting.
8
.01.01
Aligning the machine
●
Loosen the nuts
1
and turn the feet
2
so that the machine is horizontal.
●
Tighten the nuts 1.
The alignment on the lower frame tubes can be checked with a spirit level.
Fig. 8 - 01
1
2