manualshive.com logo in svg

Pfaff 3519-5/01, Instruction Manual, Page: 55 / 158

Share
Download
Pfaff 3519-5/01 Instruction Manual Download Page 55

  

Input

 55

Description of the functions

Input mode

This function is used to change the initial status of input mode.

Update drives

This function is used to update (reimport) the drives.

Conclude input

This function is used to conclude the input and the machine switches to sewing mode.

Data selection

These functions are used to mark the desired files in the current drive. Individual files are 
selected with the arrow keys. Several files can be selected at one time with the arrow keys 
in combination with the lock key (

S

).

Copy

This function is used to copy the files selected from the current data carrier to the second 
data carrier.

Delete

This function is used to delete the selected files.

MDAT/CONF

This function is used to call up the level for the configuration and machine data.
The current settings and the machine configuration are stored in the files "MDAT3519

" 

and 

"CONF3519

. 

In this way, the machine data can be copied onto an SD card as a backup or 

several machines with the same designation can be configured quickly by reading the ma-
chine data.

Format

This function is used to format the inserted SD card.

All data on the SD card is deleted in the course of the formatting process!

Summary of Contents for 3519-5/01































































































































































Reviews:

No comments