PEUGEOT 3008 HYbrif4, Handbook

Page: 163 / 284

CHECKS
161
RUNNING OUT OF FUEL
(DIESEL)
2 litre HDi engine
) Fill the fuel tank with at least fi ve li-
tres of Diesel.
) Open the bonnet.
) Unclip the style cover for access to
the priming pump.
) Slacken the bleed screw.
) Squeeze and release the priming
pump repeatedly until fuel appears
in the transparent pipe with the
green connector.
) Tighten the bleed screw.
) Operate the starter until the engine
starts.
) Put the style cover back in position
and clip it in place, ensuring that it
has clipped correctly.
) Close the bonnet.
Before doing anything under
the bonnet, switch off the igni-
tion ( Ready lamp off) to avoid
any risk of injury resulting from auto-
matic operation of the engine.
On vehicle fi tted with HDi engines, the
fuel system must be primed if you run
out of fuel; refer to the engine compart-
ment view on the "Diesel engine" page.
If the tank on your vehicle is
fi tted with
a misfuel prevention device, refer to the
section "Access - § Misfuel prevention
(Diesel)".
If the engine does not start fi rst
time, don't keep trying. Start
the procedure again from the
beginning.