PEUGEOT 3008 HYbrif4, Handbook

Page: 171 / 284

PRACTICAL
INFORMA
TION
169
If after around 5 to 7 minutes
the pressure is not attained,
this indicates that the tyre is
not repairable; contact a PEUGEOT
dealer or a quali fi ed workshop for as-
sistance.
) Switch on the compressor by mov-
ing the switch B to position "I" until
the tyre pressure reaches 2.0 bars.
The sealant is injected into the tyre
under pressure; do not disconnect
the pipe from the valve during this
operation (risk of splashing).
) Remove the kit and screw the cap
back on the white pipe.
Take care to avoid staining your ve-
hicle with traces of fl uid. Keep the kit
to hand.
) Drive immediately for approximate-
ly three miles ( fi ve kilometres), at
reduced speed (between 15 and
35 mph [20 and 60 km/h]), to plug
the puncture.
) Stop to check the repair and the tyre
pressure using the kit.